(30)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
(36)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
(16)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Bulkhead hole approximately 1/64" (0.015") larger than R Thread major diameter.
Dimensions in inches are for reference only, subject to change.
(14)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
(42)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
Body shape may vary with size/configuration. Consult factory for size-specific drawing.
(32)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
(32)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
2507 Super Duplex size 12 & 16 MPI Fittings shall be ordered with the -XF high strength Ferrule Option.
(37)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add "-Z6" to part number for part assembled with preset ferrules and nuts.
Sizes 12 & 16 come pre-assembled with -XF and -Z6 Options
Dimensions in inches are for reference only, subject to change.
(28)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add "-Z6" to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
(25)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Note for MPI™ Tube Stub #2: Assemble 1/4 to 1/2 turn from finger tight.
(14)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
(12)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Assemble 1/4 to 1/2 turn from finger tight.
Dimensions in inches are for reference only, subject to change.
(14)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
(9)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE: Ferrules are sold in Sets and are shipped in Gang of 8 on a plastic holder.MPFF-MPI--Front-Ferrule.png
(9)Parker Hannifin MPI™ connections are engineered and manufactured to be secure and gas-tight while being made manually (wrench turns) or hydraulically using a set tool. This connection has application throughout industry, including off-shore oil and gas exploration platforms, research labs, and other facilities that require operating pressures to 15,000 psi.
MPI™ Fittings are ideally suited to handle liquids, gases, or chemicals and can be used on a wide variety of tubing materials including: Instrument Grade thick-walled annealed 316 SS, 1/8th Hard (cold drawn) 316 SS MPI tubing, and 2507 Super Duplex MPI tubing. Every Parker MPI™ Fitting is supplied complete with both ferrules and compression gland nut, ready to install.
NOTE: Ferrules are sold in Sets and are shipped in Gang of 8 on a plastic holder.MPBF-MPI--Back-Ferrule.png
(10)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Bulkhead hole approximately 1/64" (.015") larger than R Thread major diameter.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(12)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
Body shape may vary with size/configuration. Consult factory for size-specific drawing.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(14)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Thickness of 2507 fittings may be greater than shown, contact factory for details if an issue
Dimensions in inches are for reference only, subject to change.
Body shape may vary with size/configuration. Consult factory for size-specific drawing.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(14)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Thickness of 2507 fittings may be greater than shown, contact factory for details if an issue
Size 10 and 12 fitting bodies made from ASTM A479/UNS S20910
Dimensions in inches are for reference only, subject to change.
Body shape may vary with size/configuration. Consult factory for size-specific drawing.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(6)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Dimensions in inches are for reference only, subject to change.
Sizes Limited due to forging size.
Not available in 2507 Material. If 316 SS Fitting is used with 2507 Tubing, Ferrules MUST be preset.
For 2507 fitting applications use an elbow and tube end adapter (EBMP7 & T7HF) in place of CBMP7.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(4)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Dimensions in inches are for reference only, subject to change.
Sizes Limited due to forging size
Not available in 2507 Material.
If 316 SS Fitting is used with 2507 Tubing, Ferrules MUST be preset.
For 2507 fitting applications use a tee and tube end adapter (JBMP7 & T7HF) in place of SBMP7
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(8)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Dimensions in inches are for reference only, subject to change.
Sizes Limited due to forging size
Not available in 2507 Material.
If 316 SS Fitting is used with 2507 Tubing, Ferrules MUST be preset.
For 2507 fitting applications use a tee and tube end adapter (JBMP7 & T7HF) in place of RBMP7
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(18)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
If produced with the optional thread relief, the minimum boss diameter shall be increased by 1/16”
60,000 psi minimum yield strength required for port material.
ØP is the maximum thru hole. Drill size should be .010" smaller than diameter shown.
All dimensions are in inches unless otherwise specified
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(16)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(30)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(8)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Bulkhead hole approximately 1/64" (.015") larger than thread major diameter.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(22)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
All male o-ring ends for MPI™ fittings are heavy duty and comply with SAE J1926/2. This end has maximum
thread engagement for strength and requires the minimum full thread engagement specified in SAE J1926/1
for the female port.
Standard O-ring material is Nitrile #N0552-90.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(10)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(37)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(18)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Assemble 1/4 to 1/2 turn from finger tight & lubricate threads & taper before each remake.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(28)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Assemble 1/4 to 1/2 turn from finger tight & lubricate threads & taper before each remake.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(44)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Assemble 1/2 turn from finger tight.
Replace “SS” with “2507” for Super Duplex
Size 12 in 2507 is assembled with -XF Ferrules as standard
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(44)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Replace "SS" with "2507" for Super Duplex
Assemble 1/2 turn from finger tight.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(48)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Replace "SS" with "2507" for Super Duplex
Assemble 1/2 turn from finger tight.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(24)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(17)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(34)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(18)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(24)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
All male o-ring ends for MPI™ fittings are heavy duty and comply with SAE J1926-2. This end has maximum
thread engagement for strength and requires the minimum full thread engagement specified in SAE J9126 for the
female port. Standard O-ring material is Nitrile #N0552-90.
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(22)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Adapts to Type “M” Swivel Hose Connection.
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(14)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Maximum working pressure based on ASME B31.3 Chapter IX safety factor
Dimensions in inches are for reference only, subject to change.
Adapts to Type “M” Swivel Hose Connection.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(21)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Sizes 12 & 16 come pre-assembled with -XF and -Z6 Options
Adapts to Type “M” Swivel Hose Connection
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
(14)Parker Hannifin, original Patent Holder (US 6851729 B2), for
"Tube Fitting, Medium Pressure" developed the MPI Medium
Pressure compression fitting connections to be secure and
gas-tight while being made manually (wrench turns) or hydraulic
set tool. This connection has application throughout industry,
including off-shore oil and gas exploration platforms, research
labs, and other facilities that require operating pressures to
15,000 psi (1035 bar).
MPI™ Fittings are ideally suited to handle liquids, gases, or
chemicals and can be used on a wide variety of tubing materials
including: Instrument Grade thick-walled annealed 316 SS, 1/8th
Hard (cold drawn) 316 or 317 SS MPI tubing, and 2507 Super
Duplex MPI tubing up to 1" OD. Every Parker MPI™ Fitting is
supplied complete with both ferrules and compression gland nut,
ready to install.
NOTE:
Add to the part number either -SS or -2507 depending on selected material. (Example: 16-16 FBMP7-SS)
End # 1 must be used with a Medium Pressure Gland.
Add “-Z6” to part number for part assembled with preset ferrules and nuts.
Sizes 12 & 16 in 2507 come pre-assembled with -XF and -Z6 Options
Dimensions in inches are for reference only, subject to change.
Pressure Rating of Fittings is controlled by tubing selected and choice of ASME Standard.
-XF Ferrules are required for 3/4" and 1" 316 SS or 2507 Super Duplex Tubing.
